About innoplas

Customer service

EVA

Description

  • Ethylene Vinyl Acetat (EVA)
  • EVA copolymer with VA content range 5-20% is common on market, they are mainly recognized for their Flexbility, Transparency, Toughness, and Sealablity.

Key advantages

  • High Clarity, Flexibility and impact strength at Low temperature.
  • Excellent Heat seal Strength, Hot-tack and Low SIT (Sealing Initial Temperature).
  • Excellent Adhension and easy Processing

Applications

  • Sealant layer for food applications: Cheese, Meat, and Poultry, etc.
  • Ice bages

LLDPE/ mPE

Description

LLDPE

  • Linear Low Density Polyethylene (LLDPE)
  • LLDPE is suitable for general purpose packaging. Films produced using this resin give good tensile properties, impact strength, sealability and optical properties 

mPE

  • Metallocence Polyethylene(mPE)
  • mPE is produced by metallocence catalysts, to provide greater Sealing proprerties, supeior toughness (Dart impact) and appeareance (Glossy and Clarity) of film compared to LLDPE

Key advantages

  • High Clarity and Glossy;
  • Balance toughness and stiffness properties. High impact resitance;
  • Good at Heat seal Strength, Hot-tack and seal throught contamination.

Applications

  • Wide application for Lamiantion Sealant layer and Mulilayer structure

MDPE/ HDPE

Description

  • Medium Density Polyethylene (MDPE) and High Density Polyethylene (HDPE)
  • With density 0.93-0.965 g/cm3, MDPE/HDPE provides a good stiffness, machenical strength and moisture barrier (WVTR) in multilayer structure.

Key advantages

  • High stiffness and mechanical properties;
  • Good at water barrier and chemical resistance.

Applications

  • Water barrier chemical resistance layer in multilayer of liquid product content.
  • Stand up pouch (SUP)

PP

Description

  • Polypropylene (PP)
  • PP is the most common plastic with low density at 0.9 g/cm3 and a wide application with sealability, stiffness, moisture barrier and heat resisatant.

Key advantages

  • High clarity, high stiff compared to conventional PE
  • Balance heat resistant and sealable at high temperature


Applications

  • Skin layer of Pouch and Thermoforming. Aseptic and retort applications 

TIE

Description

  • Tie is Coextrusion Adhesive resin, it is modified with function graft to joint two un-compatible polymer.

Key advantages

  • Able to joint two un-comatible polymer layers. Tie resin can be processed on Blown film line.

Applications

  • Symetric and Asymetric barrier structrue of multilayer process.

EVOH

Description

  • Ethylene Vinyl Alcohol (EVOH)
  • EVOH is an excellent Oxygen barrier polymer.
  • Their Oxygenl Barrier will be impovied by increasing Hydoxyl (OH) conntent in polymer.

Key advantages

  • Excellent Gas and Aroma barrier
  • With the same thickness, EVOH has 10,000 times higher Oxygen barrier than LDPE
  • Extend shelf-life of product that sensity with Oxygen

Applications

  • Fresh Food applications
  • Replace Metal material in some applications

PA

Description

  • Polyamide (PA)
  • PA provides a wide excellent properties like Heat resistance, Puncture resistance, Transparency, Thermoformability and effecive barier like gas, chemical and Aroma.

Key advantages

  • High Gas and Aroma barrier;
  • With the same thickness, PA has 200 times higher Oxygen barrier than LDPE;
  • High machenical, chemical resistance.

Applications

  • Oil Products and Dry Food;
  • Thermoforming and Vacuum;
  • High impact and puncture resitance applications.

Description

  • Ethylene Vinyl Acetat (EVA)
  • EVA copolymer with VA content range 5-20% is common on market, they are mainly recognized for their Flexbility, Transparency, Toughness, and Sealablity.

Key advantages

  • High Clarity, Flexibility and impact strength at Low temperature.
  • Excellent Heat seal Strength, Hot-tack and Low SIT (Sealing Initial Temperature).
  • Excellent Adhension and easy Processing

Applications

  • Sealant layer for food applications: Cheese, Meat, and Poultry, etc.
  • Ice bages

Media center

WORK WITH US

Acknowledged the importance of right people who build up company’s success, we fully concentrate to develop our people in both working skills and their own internal potentials. We provide our people the best place to work at.

If you are challenge-taken person, and refer the dynamic environment, feel free to submit your personal details below.


Image

Contact us

KIEN DUC PLASTIC PACKAGING JSC

Office: 1st Floor, Tani-office Building - 475D Le Trong Tan Street, Son Ky Ward, Tan Phu District, HCMC

Factory: Lot A27/1 - A28/1, Road No. 2C, Vinh Loc IP, Binh Tan District, HCMC

Telephone: + 84 8 3765 7131      Fax: +84 8 3765 7133

Email: info@innoplas.com.vn

KIEN DUC PLASTIC PACKAGING JSC Image